Application Instructions for Everglass ProCoat and Platinum ProCoat

Application Instructions for Everglass Pro Coat and Platinum Pro Coat.

      1. Use in shade only and not on hot surface (the temperature of surface of the vehicle must be between +5 and +30 degrees by Celsius).

      1. Prepare the surface of vehicle with cleaning or abrasive polishing compounds before coating.

      1. Clean the surface of vehicle also with isopropyl alcohol, white spirits or special cleaners to remove any possible remains of paste and oil.

      1. Check the surface with torch: it is should be without holograms, traces of cleaning, polishing, or other injuries.

      1. Apply the Everglass product to the applicator. Recommended foam applicator with suede microfiber cloth.

      1. The composition is applied by one part. Large bonnet can be separate on two parts. Move flowing hand with applicator with perpendicular moves, with no gaps.

      1. Wipe off coating with new microfiber towel after 1-2 minutes after application. Wipe time depends on the paint properties and the temperature and humidity of the ambient air.

      1. Correctness wipe checked by tactical torch. There should be no streaks and smudges in reflection.

      1. The next layer can be applied after 1-2 hours after application of a previous layer.

      1. The number of protective layers is not limited.

      1. It is recommended to warm up the paint after application of Infra Red lamps for 15-20 minutes at 50-60 Celsius degrees.

      1. After 2-4 hours after application of the protective coating recommends use Everglass TopCoat.