- Use in shade only and not on hot surface (the temperature of surface of the vehicle must be between +5 and +30 degrees by Celsius).
- Prepare the surface of vehicle with cleaning or abrasive polishing compounds before coating.
- Clean the surface of vehicle also with isopropyl alcohol, white spirits or special cleaners to remove any possible remains of paste and oil.
- Check the surface with torch: it is should be without holograms, traces of cleaning, polishing, or other injuries.
- Apply the Everglass product to the applicator. Recommended foam applicator with suede microfiber cloth.
- The composition is applied by one part. Large bonnet can be separate on two parts. Move flowing hand with applicator with perpendicular moves, with no gaps.
- Wipe off coating with new microfiber towel after 1-2 minutes after application. Wipe time depends on the paint properties and the temperature and humidity of the ambient air.
- Correctness wipe checked by tactical torch. There should be no streaks and smudges in reflection.
- The next layer can be applied after 1-2 hours after application of a previous layer.
- The number of protective layers is not limited.
- It is recommended to warm up the paint after application of Infra Red lamps for 15-20 minutes at 50-60 Celsius degrees.
- After 2-4 hours after application of the protective coating recommends use Everglass Topcoat, Graphene or Carbon.