Application Instructions for Everglass Mono Coat

  • Use in shade only and not on hot surface (the temperature of surface of the vehicle must be between +5 and +30 degrees by Celsius).
  • Prepare the surface of vehicle with cleaning or abrasive polishing compounds before coating.
  • Clean the surface of vehicle with isopropyl alcohol (40%), white spirit or special cleaners to remove any possible remains of paste and oil.
  • Check the surface with torch: it is should be without holograms, traces of cleaning, polishing, or other injuries.
  • Apply the Everglass product to the applicator. Recommended foam applicator with suede microfiber cloth.
  • The coating is need to be apply by one part. Large bonnet can be separate on two parts. Move flowing hand with applicator with perpendicular moves without gaps.
  • Wipe off coating with new microfiber towel after 2-3 minutes after application. Wipe time depends on the paint properties and the temperature and humidity of the ambient air.
  • Correctness of wipe need to be checked by tactical torch. There should be no streaks and smudges in reflection.
  • The next layer can be applied after 1-2 hours after application of a previous layer.
  • The number of protective layers is not limited.
  • It is recommend to warm up the clearcoat after application with Infra Red lamps for 15-20 minutes at 50-60 Celsius degrees.
  • Curing time of the coating – 12 hours.
  • Full strength – 72 hours.