Application Instructions for Everglass TopCoat & Sample Coat
- Use in shade only and not on hot surface (the temperature of surface of the vehicle must be between +5 and +30 degrees by Celsius).
- Prepare the surface of vehicle with cleaning or abrasive polishing compounds before coating.
- Clean the surface of vehicle also with isopropyl alcohol, white spirit or special cleaners to remove any possible remains of paste and oil.
- Check with torch the surface; it should be without holograms, traces of cleaning, polishing, or other injuries.
- Shake bottle well before use. Apply the Everglass product to the applicator. Recommended foam applicator with suede microfiber cloth.
- Topcoat is applied partly. Area is approx. 50cmx50cm. (Large bonnet can be separate on four parts.) Move applicator with smooth motions, crisscross, with no gaps.
- Quickly wipe off coating with new microfiber towel in 15-30 seconds after application by hand in a circular motion.
- Wipe time depends on the clearcoat properties and the temperature and humidity of the ambient air.
- Correctness wipe checked by tactical torch. There should be no streaks and smudges in reflection.
- The next layer can be applied after 1-2 hours after application of a previous layer.
- It is recommended to warm up the clearcoat after application of Infra Red lamps for 15-20 minutes at 50-60 Celsius degrees.
- Curing time of the coating – 12 hours.
- Waiting time before the first wash – 1 week.